Distal hamstrings tendons mechanical properties at rest and contraction using free-hand 3-D ultrasonography.

Tendon properties impact human locomotion, influencing sports performance, and injury prevention. Hamstrings play a crucial role in sprinting, particularly the biceps femoris long head (BFlh), which is prone to frequent injuries. It remains uncertain if BFlh exhibits distinct mechanical properties compared to other hamstring muscles. This study utilized free-hand three-dimensional ultrasound to assess morphological and mechanical properties of distal hamstrings tendons in 15 men. Scans were taken in prone position, with hip and knee extended, at rest and during 20%, 40%, 60%, and 80% of maximal voluntary isometric contraction of the knee flexors. Tendon length, volume, cross-sectional area (CSA), and anteroposterior (AP) and mediolateral (ML) widths were quantified at three locations. Longitudinal and transverse deformations, stiffness, strain, and stress were estimated. The ST had the greatest tendon strain and the lowest stiffness as well as the highest CSA and AP and ML width strain compared to other tendons. Biceps femoris short head (BFsh) exhibited the least strain, AP and ML deformation. Further, BFlh displayed the highest stiffness and stress, and BFsh had the lowest stress. Additionally, deformation varied by region, with the proximal site showing generally the lowest CSA strain. Distal tendon mechanical properties differed among the hamstring muscles during isometric knee flexions. In contrast to other bi-articular hamstrings, the BFlh high stiffness and stress may result in greater energy absorption by its muscle fascicles, rather than the distal tendon, during late swing in sprinting. This could partly account for the increased incidence of hamstring injuries in this muscle.

Fully automatic tracking of native knee kinematics from stereo-radiography with digitally reconstructed radiographs.

Precise measurement of joint-level motion from stereo-radiography facilitates understanding of human movement. Conventional procedures for kinematic tracking require significant manual effort and are time intensive. The current work introduces a method for fully automatic tracking of native knee kinematics from stereo-radiography sequences. The framework consists of three computational steps. First, biplanar radiograph frames are annotated with segmentation maps and key points using a convolutional neural network. Next, initial bone pose estimates are acquired by solving a polynomial optimization problem constructed from annotated key points and anatomic landmarks from digitized models. A semidefinite relaxation is formulated to realize the global minimum of the non-convex problem. Pose estimates are then refined by registering computed tomography-based digitally reconstructed radiographs to masked radiographs. A novel rendering method is also introduced which enables generating digitally reconstructed radiographs from computed tomography scans with inconsistent slice widths. The automatic tracking framework was evaluated with stereo-radiography trials manually tracked with model-image registration, and with frames which capture a synthetic leg phantom. The tracking method produced pose estimates which were consistently similar to manually tracked values; and demonstrated pose errors below 1.0 degree or millimeter for all femur and tibia degrees of freedom in phantom trials. Results indicate the described framework may benefit orthopaedics and biomechanics applications through acceleration of kinematic tracking.

Joint reconstruction and segmentation in undersampled 3D knee MRI combining shape knowledge and deep learning.

Objective.Task-adapted image reconstruction methods using end-to-end trainable neural networks (NNs) have been proposed to optimize reconstruction for subsequent processing tasks, such as segmentation. However, their training typically requires considerable hardware resources and thus, only relatively simple building blocks, e.g. U-Nets, are typically used, which, albeit powerful, do not integrate model-specific knowledge.Approach.In this work, we extend an end-to-end trainable task-adapted image reconstruction method for a clinically realistic reconstruction and segmentation problem of bone and cartilage in 3D knee MRI by incorporating statistical shape models (SSMs). The SSMs model the prior information and help to regularize the segmentation maps as a final post-processing step. We compare the proposed method to a simultaneous multitask learning approach for image reconstruction and segmentation (MTL) and to a complex SSMs-informed segmentation pipeline (SIS).Main results.Our experiments show that the combination of joint end-to-end training and SSMs to further regularize the segmentation maps obtained by MTL highly improves the results, especially in terms of mean and maximal surface errors. In particular, we achieve the segmentation quality of SIS and, at the same time, a substantial model reduction that yields a five-fold decimation in model parameters and a computational speedup of an order of magnitude.Significance.Remarkably, even for undersampling factors of up toR= 8, the obtained segmentation maps are of comparable quality to those obtained by SIS from ground-truth images.

Fast T2 mapping of short-T2 tissues in knee using 3D radial dual-echo balanced steady-state free precession.

BACKGROUND: T2 mapping of short-T2 tissues in the knee (meniscus, tendon, and ligament) is needed to aid the clinical MRI knee diagnosis, which is hard to realize using traditional clinical methods. PURPOSE: To accelerate the acquisition of T2 values for short-T2 tissues in the knee by analyzing the signal equation of balanced steady-state free precession (bSSFP) sequence in MRI. METHODS: Effect of half-radial acquisition on pixel bandwidth was analyzed mathematically. A modified 3D radial dual-echo bSSFP sequence was proposed for 0.53 mm isotropic resolution knee imaging with 2 different TEs at 3 T, which alleviated the problem of off-resonance artifacts caused by traditional half-radial acquisition scheme. A novel pixel-based optimization method was proposed for efficient T2 mapping of short-T2 tissues in the knee given off-resonance values. Simulation was conducted to evaluate the sensitivity of the proposed method to other parameters. Phantom results were compared with 2D spin-echo (SE), and in vivo results were compared with SE and previously studies. RESULTS: Simulation showed that the proposed method is insensitive to T1 and B1 variations (estimation error < 1% for T1/B1 error of ±90%), avoiding the need for separated T1 and B1 scans. High isotropic resolution knee imaging was achieved using the modified dual-echo bSSFP. The total scan time was within 3.5 min, including a separate off-resonance scan for T2 measurement. Measured mean T2 values for phantoms correlated well with SE (R2 = 0.99), and no significant difference was observed (P = 0.45). In vivo meniscus T2 measurements and ligament T2 measurements agreed with the literature, while tendon T2 measurements were much lower (31.7% lower for patellar tendon, and 13.5% lower for quadriceps tendon), which might result in its bi-component property. CONCLUSIONS: The proposed method provides an efficient way for fast, robust, high-resolution imaging and T2 mapping of short-T2 tissues in the knee.

Dual output feature fusion networks for femoral segmentation and quantitative analysis of the knee joint.

BACKGROUND: Magnetic resonance imaging (MRI) is the preferred imaging modality for diagnosing knee disease. Segmentation of the knee MRI images is essential for subsequent quantification of clinical parameters and treatment planning for knee prosthesis replacement. However, the segmentation remains difficult due to individual differences in anatomy, the difficulty of obtaining accurate edges at lower resolutions, and the presence of speckle noise and artifacts in the images. In addition, radiologists must manually measure the knee's parameters which is a laborious and time-consuming process. PURPOSE: Automatic quantification of femoral morphological parameters can be of fundamental help in the design of prosthetic implants for the repair of the knee and the femur. Knowledge of knee femoral parameters can provide a basis for femoral repair of the knee, the design of fixation materials for femoral prostheses, and the replacement of prostheses. METHODS: This paper proposes a new deep network architecture to comprehensively address these challenges. A dual output model structure is proposed, with a high and low layer fusion extraction feature module designed to extract rich features through the cross-fusion mechanism. A multi-scale edge information extraction spatial feature module is also developed to address the boundary-blurring problem. RESULTS: Based on the precise automated segmentation results, 10 key clinical parameters were automatically measured for a knee femoral prosthesis replacement program. The correlation coefficients of the quantitative results of these parameters compared to manual results all achieved at least 0.92. The proposed method was extensively evaluated with MRIs of 78 patients' knees, and it consistently outperformed other methods used for segmentation. CONCLUSIONS: The automated quantization process produced comparable measurements to those manually obtained by radiologists. This paper demonstrates the viability of automatic knee MRI image segmentation and quantitative analysis with the proposed method. This provides data to support the accuracy of assessing the progression and biomechanical changes of osteoarthritis of the knee using an automated process, thus saving valuable time for the radiologists and surgeons.

Water-Fat Separation for the Knee on a 50 mT Portable MRI Scanner.

OBJECTIVE: The Dixon method is frequently employed in clinical and scientific research for fat suppression, because it has lower sensitivity to static magnetic field inhomogeneity compared to chemical shift selective saturation or its variants and maintains image signal-to-noise ratio (SNR). Recently, research on very-low-field (VLF < 100 mT) magnetic resonance imaging (MRI) has regained popularity. However, there is limited literature on water-fat separation in VLF MRI. Here, we present a modified two-point Dixon method specifically designed for VLF MRI. METHODS: Most experiments were performed on a homemade 50 mT portable MRI scanner. The receiving coil adopted a homemade quadrature receiving coil. The data were acquired using spin-echo and gradient-echo sequences. We considered the T2* effect, and added priori information to existing two-point Dixon method. Then, the method used regional iterative phasor extraction (RIPE) to extract the error phasor. Finally, least squares solutions for water and fat were obtained and fat signal fraction was calculated. RESULTS: For phantom evaluation, water-only and fat-only images were obtained and the local fat signal fractions were calculated, with two samples being 0.94 and 0.93, respectively. For knee imaging, cartilage, muscle and fat could be clearly distinguished. The water-only images were able to highlight areas such as cartilage that could not be easily distinguished without separation. CONCLUSION: This work has demonstrated the feasibility of using a 50 mT MRI scanner for water-fat separation. SIGNIFICANCE: To the best of our knowledge, this is the first reported result of water-fat separation at a 50 mT portable MRI scanner.

Strength and passive stiffness of the quadriceps are associated with patellar alignment in older adults with knee pain.

BACKGROUND: Maintaining normal patellar alignment is important for knee health. Altered activation of individual quadriceps muscles have been found related to patellar alignment. However, the relationships between strength and passive stiffness of the quadriceps and patellar alignment remains unexplored. METHODS: Participants aged between 60 and 80 years with activity-induced knee pain were recruited. Knee pain was quantified using an 11-point numeric rating scale. Quadriceps strength was assessed using a Cybex dynamometer and passive stiffness of rectus femoris, vastus lateralis, and vastus medialis were measured by shear-wave ultrasound elastography. Patellar alignments were assessed using MR imaging. Linear regression was used to examine relationships between quadriceps properties and patellar alignments with and without controlling for potential covariates. FINDINGS: Ninety-two eligible participants were assessed (71.7% females, age: 65.6 ± 3.8 years; pain scale: 4.6 ± 2.0), most of whom had knee pain during stair climbing (85.9%). We found that 17% of patellar lateral tilt angle could be explained by lower quadriceps strength (adjusted R2 = 0.117; P < 0.001), especially in females (R2 = 0.281; P < 0.001; adjusted R2 = 0.211; P < 0.001). In addition, a higher stiffness ratio of vastus lateralis/medialis accounted for 12% of patellar lateral displacement (adjusted R2 = 0.112; P = 0.008). INTERPRETATION: Quadriceps strength and relative stiffness of lateral to medial heads are associated with patellar alignment in older adults with knee pain. It suggests that quadriceps weakness and relatively stiffer lateral quadriceps may be risk factors related to patellar malalignments in the elderly.

Validation and evaluation of subject-specific finite element models of the pediatric knee.

Finite element (FE) models have been widely used to investigate knee joint biomechanics. Most of these models have been developed to study adult knees, neglecting pediatric populations. In this study, an atlas-based approach was employed to develop subject-specific FE models of the knee for eight typically developing pediatric individuals. Initially, validation simulations were performed at four passive tibiofemoral joint (TFJ) flexion angles, and the resulting TFJ and patellofemoral joint (PFJ) kinematics were compared to corresponding patient-matched measurements derived from magnetic resonance imaging (MRI). A neuromusculoskeletal-(NMSK)-FE pipeline was then used to simulate knee biomechanics during stance phase of walking gait for each participant to evaluate model simulation of a common motor task. Validation simulations demonstrated minimal error and strong correlations between FE-predicted and MRI-measured TFJ and PFJ kinematics (ensemble average of root mean square errors < 5 mm for translations and < 4.1° for rotations). The FE-predicted kinematics were strongly correlated with published reports (ensemble average of Pearson's correlation coefficients (ρ) > 0.9 for translations and ρ > 0.8 for rotations), except for TFJ mediolateral translation and abduction/adduction rotation. For walking gait, NMSK-FE model-predicted knee kinematics, contact areas, and contact pressures were consistent with experimental reports from literature. The strong agreement between model predictions and experimental reports underscores the capability of sequentially linked NMSK-FE models to accurately predict pediatric knee kinematics, as well as complex contact pressure distributions across the TFJ articulations. These models hold promise as effective tools for parametric analyses, population-based clinical studies, and enhancing our understanding of various pediatric knee injury mechanisms. They also support intervention design and prediction of surgical outcomes in pediatric populations.

Integration of statistical shape modeling and alternating interpolation-based model tracking technique for measuring knee kinematics in vivo using clinical interleaved bi-plane fluoroscopy.

Background: A 2D fluoroscopy/3D model-based registration with statistical shape modeling (SSM)-reconstructed subject-specific bone models will help reduce radiation exposure for 3D kinematic measurements of the knee using clinical alternating bi-plane fluoroscopy systems. The current study aimed to develop such an approach and evaluate in vivo its accuracy and identify the effects of the accuracy of SSM models on the kinematic measurements. Methods: An alternating interpolation-based model tracking (AIMT) approach with SSM-reconstructed subject-specific bone models was used for measuring 3D knee kinematics from dynamic alternating bi-plane fluoroscopy images. A two-phase optimization scheme was used to reconstruct subject-specific knee models from a CT-based SSM database of 60 knees using one, two, or three pairs of fluoroscopy images. Using the CT-reconstructed model as a benchmark, the performance of the AIMT with SSM-reconstructed models in measuring bone and joint kinematics during dynamic activity was evaluated in terms of mean target registration errors (mmTRE) for registered bone poses and the mean absolute differences (MAD) for each motion component of the joint poses. Results: The mmTRE of the femur and tibia for one image pair were significantly greater than those for two and three image pairs without significant differences between two and three image pairs. The MAD was 1.16 to 1.22° for rotations and 1.18 to 1.22 mm for translations using one image pair. The corresponding values for two and three image pairs were 0.75 to 0.89° and 0.75 to 0.79 mm; and 0.57 to 0.79° and 0.6 to 0.69 mm, respectively. The MAD values for one image pair were significantly greater than those for two and three image pairs without significant differences between two and three image pairs. Conclusions: An AIMT approach with SSM-reconstructed models was developed, enabling the registration of interleaved fluoroscopy images and SSM-reconstructed models from more than one asynchronous fluoroscopy image pair. This new approach had sub-millimeter and sub-degree measurement accuracy when using more than one image pair, comparable to the accuracy of CT-based methods. This approach will be helpful for future kinematic measurements of the knee with reduced radiation exposure using 3D fluoroscopy with clinically alternating bi-plane fluoroscopy systems.

Rotura traumática simultánea y bilateral del tendón del cuádriceps en un paciente fisicoculturista: informe de caso y revisión de la literatura / Simultaneous bilateral traumatic quadriceps tendon rupture in a bodybuilding patient: case report and literature review

La rotura traumática, simultánea y bilateral del tendón cuadricipital es una lesión infrecuente, generalmente asociada a otras enfermedades sistémicas tales como insuficiencia renal o trastornos endocrinos. Presentamos el caso de un varón sano y atleta de 38 años que sufrió esta lesión mientras realizaba una sentadilla en el gimnasio. (AU)

The traumatic bilateral and simultaneous quadriceps tendon rupture is a rare injury, usually associated with other systemic diseases such as renal insufficiency or endocrine disorders. We present the case of a 38-year-old healthy male athlete who sustained this injury while performing a squat at the gym. (AU)

Biceps Femoris Fascicle Behavior during Submaximal and Maximal Slow Speed Contractions.

PURPOSE: The present study compared the effects of contraction intensity (submaximal vs maximal) and mode (concentric vs eccentric) on biceps femoris long head (BFlh) fascicle lengthening, rotation, and architectural gear ratio at long and short muscle lengths. METHODS: Data were captured from 18 healthy adults (10 men and 8 women) without history of right hamstring strain injury. BFlh fascicle length ( Lf ), fascicle angle (FA), and muscle thickness (MT) were assessed in real time using two serially aligned ultrasound devices while submaximal and maximal concentric and eccentric isokinetic knee flexions were performed at 30°·s -1 . Ultrasound videos were exported and edited to create a single, synchronized video, and three fascicles were analyzed through the range of motion (10° to 80°). Changes (Δ) in Lf , FA, MT, and muscle gear at long (60° to 80° knee angle; 0° = full knee extension) and short (10° to 30°) muscle lengths and across the full knee flexion range were measured and compared. RESULTS: Greater Δ Lf was observed at long muscle length ( P < 0.001) during both submaximal and maximal eccentric and concentric contractions. When the full length range was analyzed, a slightly greater ΔMT was observed in concentric contractions ( P = 0.03). No significant differences between submaximal and maximal contractions were observed for Δ Lf , ΔFA, or ΔMT. No changes were detected in the calculated muscle gear between muscle lengths, intensities, or conditions ( P > 0.05). CONCLUSIONS: Although gear ratio ranged ~1.0 to 1.1 under most conditions, the increased fascicle lengthening observed at long muscle lengths might influence acute myofiber damage risk but also speculatively play a role in chronic hypertrophic responses to training.

Magnetic resonance imaging of the knee for chronological age estimation-a systematic review.

INTRODUCTION: Radiographs of the hand and teeth are frequently used for medical age assessment, as skeletal and dental maturation correlates with chronological age. These methods have been criticized for their lack of precision, and magnetic resonance imaging (MRI) of the knee has been proposed as a more accurate method. The aim of this systematic review is to explore the scientific and statistical evidence for medical age estimation based on skeletal maturation as assessed by MRI of the knee. MATERIALS AND METHODS: A systematic review was conducted that included studies published before April 2021 on living individuals between 8 and 30 years old, with presumptively healthy knees for whom the ossification stages had been evaluated using MRI. The correlation between "mature knee" and chronological age and the risk of misclassifying a child as an adult and vice versa was calculated. RESULTS: We found a considerable heterogeneity in the published studies -in terms of study population, MRI protocols, and grading systems used. There is a wide variation in the correlation between maturation stage and chronological age. CONCLUSION: Data from published literature is deemed too heterogenous to support the use of MRI of the knee for chronological age determination. Further, it is not possible to assess the sensitivity, specificity, negative predictive value, or positive predictive value for the ability of MRI to determine whether a person is over or under 18 years old. KEY POINTS: • There is an insufficient scientific basis for the use of magnetic resonance imaging of the knee in age determination by skeleton. • It is not possible to assess the predictive value of MRI of the knee to determine whether a person is over or under 18 years of age.

Does interpolation and intra-user variability affect the accuracy of arthrokinematic measurements in the knee? A dual fluoroscopic imaging and model-based tracking study.

Model-based tracking (MBT) is a time-consuming and semiautomatic approach, and thus subject to errors during the tracking process. The present study aimed primarily to quantify the effects that interpolation and intra-user variability associated with MBT have on the kinematic and arthrokinematic measurements in comparison to a gold standard radiostereometric analysis (RSA). Cadaveric knee specimens were imaged at 125 Hz while simulating standing, walking, jogging, and lunging motions. (Arthro)kinematic metrics were calculated via MBT without interpolation, MBT with two interpolation techniques when every fifth or tenth frame was analyzed, and RSA. Tracking the same activity multiple times affected (p-value, largest mean difference) the flexion-extension (FE) joint angle during walking (0.03, 0.6°), and the internal-external joint angle during jogging (0.048, -0.9°). Only during jogging for the FE joint angle was there an effect of interpolation (0.046, 0.3°). Neither tracking multiple times nor interpolation affected arthrokinematic metrics (contact path locations and excursions). The present study is the first to quantify the effects that intra-user variability and interpolation have on the (arthro)kinematic measurement accuracy using MBT. Results suggest interpolation may be used without sacrificing (arthro)kinematic outcome measurement accuracy and the errors associated with intra-user variability, while small, were larger than errors due to interpolation.

Linking muscle architecture and function in vivo: conceptual or methodological limitations?

Background: Despite the clear theoretical link between sarcomere arrangement and force production, the relationship between muscle architecture and function remain ambiguous in vivo. Methods: We used two frequently used ultrasound-based approaches to assess the relationships between vastus lateralis architecture parameters obtained in three common conditions of muscle lengths and contractile states, and the mechanical output of the muscle in twenty-one healthy subjects. The relationship between outcomes obtained in different conditions were also examined. Muscle architecture was analysed in panoramic ultrasound scans at rest with the knee fully extended and in regular scans at an angle close to maximum force (60°), at rest and under maximum contraction. Isokinetic and isometric strength tests were used to estimate muscle force production at various fascicle velocities. Results: Measurements of fascicle length, pennation angle and thickness obtained under different experimental conditions correlated moderately with each other (r = 0.40-.74). Fascicle length measured at 60° at rest correlated with force during high-velocity knee extension (r = 0.46 at 400° s-1) and joint work during isokinetic knee extension (r = 0.44 at 200° s-1 and r = 0.57 at 100° s-1). Muscle thickness was related to maximum force for all measurement methods (r = 0.44-0.73). However, we found no significant correlations between fascicle length or pennation angle and any measures of muscle force or work. Most correlations between architecture and force were stronger when architecture was measured at rest close to optimal length. Conclusion: These findings reflect methodological limitations of current approaches to measure fascicle length and pennation angle in vivo. They also highlight the limited value of static architecture measurements when reported in isolation or without direct experimental context.

MSH-5: malignant knee tumors timely detection index.

BACKGROUND: Bone neoplasms are usually misdiagnosed causing a delay in their treatment. Bone neoplasms are usually confused with tendinitis, 31% of the cases corresponds to osteosarcomas and in 21% to Ewing's sarcomas. OBJECTIVE: To create a clinical-radiographic instrument of high diagnostic suspicion of knee bone neoplasms to prevent a delay in diagnosis. METHOD: A clinimetric study (sensitivity, consistency and validity) was performed in the bone tumor service, Hospital de Ortopedia de la Unidad Médica de Alta Especialidad Dr. Victorio de la Fuente Narváez, Instituto Mexicano del Seguro Social, in México City. RESULTS: Characteristics of 153 patients were collected. For the sensitivity phase, 3 domains (signs, symptoms, and radiology) and 12 items were included. Consistency was evaluated with ICC (0.944), 95%CI (0.865-0.977), p < 0.001 and a-Cronbach (0.863). Index obtained a sensitivity of 0.80 and a specificity of 0.882 were obtained. The positive predictive value of the test was 66.6% and the negative predictive value was 93.75%. The positive likelihood ratio was 6.8 and the negative likelihood ratio was 0.2. Validity was evaluated using r-Pearson (0.894; p < 0.001). CONCLUSIONS: A high suspicion clinical-radiographic index was designed to detect malignant knee tumors with adequate sensitivity, specificity, appearance, content, criteria, and construct validity.

ANTECEDENTES: Los tumores óseos suelen ser subdiagnosticados, provocando un retraso en su tratamiento. El diagnóstico erróneo más frecuente es tendinitis, en el cual el 31% corresponden a osteosarcomas y el 21% a sarcomas de Ewing. OBJETIVO: Crear un instrumento clínico-radiográfico de alta sospecha diagnóstica de tumores óseos de rodilla. MÉTODO: Se realizó un estudio clinimétrico (sensibilidad, consistencia y validez) en el servicio de tumores óseos del Hospital de Ortopedia de la Unidad Médica de Alta Especialidad Dr. Victorio de la Fuente Narváez, Instituto Mexicano del Seguro Social, en Ciudad de México. RESULTADOS: El índice se realizó tomando las características de 153 pacientes. Para la fase de sensibilidad se incluyeron tres dominios (signos, síntomas y radiología) y 12 ítems. La consistencia se evaluó con coeficiente de correlación intraclase (0.944), intervalo de confianza del 95% (0.865-0.977), p < 0.001 y α de Cronbach (0.863). Se obtuvo una sensibilidad del instrumento de 0.80 y una especificidad de 0.882. El valor predictivo positivo de la prueba fue del 66.6% y el valor predictivo negativo fue de 93.75%. La razón de verosimilitud positiva fue de 6.8 y la razón de verosimilitud negativa fue de 0.2. La validez se evaluó mediante r-Pearson (0.894; p < 0.001). CONCLUSIONES: Se diseñó un índice clínico-radiográfico de alta sospecha para detectar tumores malignos de rodilla con adecuada sensibilidad, especificidad y validez de apariencia, de contenido, de criterio y de constructo.

Correlations Between Hamstring Muscle Architecture, Maturation, and Anthropometric Measures in Academy Soccer Players.

PURPOSE: Muscle architecture is associated with motor performance and muscle injury. While muscle architecture and knee-flexor eccentric strength change with growth, the influence of anthropometric measures on these properties is rarely considered. This study aimed to investigate the relationship between hamstring muscle architecture and knee-flexor eccentric strength with anthropometric measurements. METHODS: Sixty male footballers (16.6 [1.05] y) from the U16, U17, and U19 teams of an elite soccer club were included in this study. Fascicle length, pennation angle, and muscle thickness of the biceps femoris long head (BFlh) and semimembranosus muscles were measured in both legs using ultrasound. Knee-flexor eccentric strength, height, body mass, leg length, femur length, and peak height velocity (PHV) were measured within 1 week of the ultrasound images. A stepwise regression and 1-way analysis of variance tests were used to evaluate the effects of age, maturity, and anthropometric measurements on muscle properties. RESULTS: Variance within BFlh and semimembranosus muscle thickness (r < .61), semimembranosus pennation angle (r < .58), and knee-flexor eccentric strength (r = .50) were highly related to body mass. We observed no significant correlations between muscle architecture and age (P > .29). However, moderately greater BFlh muscle thickness was shown for the post-PHV compared with the PHV group (effect size ± 90% CI: 0.72 ± 0.49). CONCLUSIONS: In conclusion, weak correlations between muscle architecture and anthropometric measurements suggest that other factors (ie, genetics, training regimen) influence muscle architecture. The moderate effect of maturity on BFlh muscle thickness strongly suggests post-PHV hypertrophy of the BFlh muscle. Our results confirmed previous findings that eccentric knee-flexor strength is influenced by body mass.

Navigated functional alignment total knee arthroplasty achieves reliable, reproducible and accurate results with high patient satisfaction.

PURPOSE: The decision on which technique to perform a total knee arthroplasty (TKA) has become more complicated over the last decade. Perceived limitations of mechanical alignment (MA) and kinematic alignment (KA) have led to the development of the functional alignment (FA) philosophy. This study aims to report the 2-year results of an initial patient cohort in terms of revision rate, PROMs and complications for Computer Aided Surgery (CAS) Navigated FA TKA. METHODS: This paper reports a single surgeon's outcomes of 165 consecutive CAS FA TKAs. The final follow-up was 24 months. Pre-operative and post-operative patient-reported outcome measures, WOMAC and KSS, and intra-operative CAS data, including alignment, kinematic curves, and gaps, are reported. Stress kinematic curves were analysed for correlation with CAS final alignment and CAS final alignment with radiographic long-leg alignment. Pre- and post-operative CPAK and knee phenotypes were recorded. Three different types of prostheses from two manufacturers were used, and outcomes were compared. Soft tissue releases, revision and complication data are also reported. RESULTS: Mean pre-operative WOMAC was 48.8 and 1.2 at the time of the final follow-up. KSS was 48.8 and 93.7, respectively. Pre- and post-operative range of motion was 118.6° and 120.1°, respectively. Pre-operative and final kinematic curve prediction had an accuracy of 91.8%. CAS data pre-operative stress alignment and final alignment strongly correlate in extension and flexion, r = 0.926 and 0.856, p < 0.001. No statistical outcome difference was detected between the types of prostheses. 14.5% of patients required soft tissue release, with the lateral release (50%) and posterior capsule (29%) being the most common. CONCLUSION: CAS FA TKA in this cohort proved to be a predictable, reliable, and reproducible technique with acceptable short-term revision rates and high PROMs. FA can account for extremes in individual patient bony morphology and achieve desired gap and kinematic targets with soft tissue releases required in only 14.5% of patients. LEVEL OF EVIDENCE: IV (retrospective case series review).

Deep Learning Reconstruction Enables Prospectively Accelerated Clinical Knee MRI.

Background MRI is a powerful diagnostic tool with a long acquisition time. Recently, deep learning (DL) methods have provided accelerated high-quality image reconstructions from undersampled data, but it is unclear if DL image reconstruction can be reliably translated to everyday clinical practice. Purpose To determine the diagnostic equivalence of prospectively accelerated DL-reconstructed knee MRI compared with conventional accelerated MRI for evaluating internal derangement of the knee in a clinical setting. Materials and Methods A DL reconstruction model was trained with images from 298 clinical 3-T knee examinations. In a prospective analysis, patients clinically referred for knee MRI underwent a conventional accelerated knee MRI protocol at 3 T followed by an accelerated DL protocol between January 2020 and February 2021. The equivalence of the DL reconstruction of the images relative to the conventional images for the detection of an abnormality was assessed in terms of interchangeability. Each examination was reviewed by six musculoskeletal radiologists. Analyses pertaining to the detection of meniscal or ligament tears and bone marrow or cartilage abnormalities were based on four-point ordinal scores for the likelihood of an abnormality. Additionally, the protocols were compared with use of four-point ordinal scores for each aspect of image quality: overall image quality, presence of artifacts, sharpness, and signal-to-noise ratio. Results A total of 170 participants (mean age ± SD, 45 years ± 16; 76 men) were evaluated. The DL-reconstructed images were determined to be of diagnostic equivalence with the conventional images for detection of abnormalities. The overall image quality score, averaged over six readers, was significantly better (P < .001) for the DL than for the conventional images. Conclusion In a clinical setting, deep learning reconstruction enabled a nearly twofold reduction in scan time for a knee MRI and was diagnostically equivalent with the conventional protocol. © RSNA, 2023 Supplemental material is available for this article. See also the editorial by Roemer in this issue.

Knee positioning systems for X-ray environment: a literature review.

The knee is one of the most stressed joints of the human body, being susceptible to ligament injuries and degenerative diseases. Due to the rising incidence of knee pathologies, the number of knee X-rays acquired is also increasing. Such X-rays are obtained for the diagnosis of knee injuries, the evaluation of the knee before and after surgery, and the monitoring of the knee joint's stability. These types of diagnosis and monitoring of the knee usually involve radiography under physical stress. This widely used medical tool provides a more objective analysis of the measurement of the knee laxity than a physical examination does, involving knee stress tests, such as valgus, varus, and Lachman. Despite being an improvement to physical examination regarding the physician's bias, stress radiography is still performed manually in a lot of healthcare facilities. To avoid exposing the physician to radiation and to decrease the number of X-ray images rejected due to inadequate positioning of the patient or the presence of artefacts, positioning systems for stress radiography of the knee have been developed. This review analyses knee positioning systems for X-ray environment, concluding that they have improved the objectivity and reproducibility during stress radiographs, but have failed to either be radiolucent or versatile with a simple ergonomic set-up.